86 Wall Panel Transmitter RF Remote Control Switch 3 Button - 1 x Transmitter + 3 x Receiver
Special Price $12.99 Regular Price $18.99
It is a learning code transmitter with EV1527 IC Chip.
This 86 Type 3 Button Wall Panel Transmitter can be learned into most of the learning code receiver. It can be stuck anywhere with the 3M sticker included.
- 86 panel wall remote transmitter with 3 buttons.
- Can be stuck anywhere.
- It is a learning code transmitter with EV1527 IC Chip.
- It can be learned into most of the learning code receiver.
- Jog/Non-Latched: Press one button is working /ON. loosen your finger on the same button is stop/OFF. One channel switch need one buttons remote control.
- Self -lock/Self-Latched: Press one button for one time is working/ON. Press the same button again is stop/OFF(one channel switch need one buttons remote control).
- Inter-lock /Latched: Press one button is working/ON, press another button is stop/OFF( one channel switch need 2 buttons remote control).
- Keeping press the learning button, the LED indicator flash fast then press the transmitter button, until the LED indicator stop to flash fast, it mean learning successfully.
- Keeping press the Learning Button on the receiver until the LED indicator flash fast until it flash slow 2 times. It means the code have cleared successfully.
|Working Voltage||AC220V (Input AC220V Output AC220V)|
|Max. Current||10A (have better lower than 7A )|
|Working Temperature||-10℃ - +60℃|
|Output Way||Momentary. Toggle. Latched Adjustable|
|Code Type||Learning code Add Controller by the Learning Button on the receiver|
|Package Contents||1 x Transmitter, 3 x Receivers|
Write Your Own Review