Stay safe and know that your car is in top condition is most important. Ideally, brake fluid should be checked regularly and changed every one to two years. As moisture seeps into the brake system through the brake hoses and seals the brake fluid will become contaminated and the danger of brake failure will increase. This pen-shaped brake fluid tester can easily help determine whether it's time for you to change your brake fluid.
Developed for professional use in automotive repair shops and servicing. Brake fluid detection pen is based on the change in conductivity to determine the moisture change brake fluid. It shows clearly the extent of moisture contained by the light-emitting diode. The high moisture content will lead to a lower boiling point, affect braking performance.
Brake fluid detection pen is based on the change in conductivity to determine the moisture change of brake fluid
Testing DOT 3, DOT 4, DOT 5 brake fluid, only takes seconds to know the results
5 LEDs to indicate percentage of water in the brake fluid
The tester will automatically power off after about 15 seconds of inactivity.
Unscrew the brake fluid reservoir, and pull of the cap of the brake fluid tester. Dip the test probes into the brake fluid up to the plastic rim of the device.
|Power Supply||1 x 1.5V "AAA" Battery (Battery not Included)|
|Principle||according to conductivity changes to determine moisture change in brake fluid, with five different color LED indicator|
|Product Size||15 x 2.3 x 2.0 (cm)|
Use spaces to separate tags. Use single quotes (') for phrases.
You may also be interested in the following product(s).