Compatible with GoPro HERO4, HERO3+, HERO3, and similarly-sized cameras, the Feiyu MiNi 3D Pro is a 3-axis motorized gimbal that can be mounted to a fixed wing or multi-rotor RC aircraft.Compared to the previous model, the MiNi 3D Pro offers full 360째 pan control and an improved design for easier assembly and installation. A separate power supply is required. By connecting the gimbal to an RC receiver, you can use a transmitter to switch between additional modes as well as manually control pan and tilt.
Continuous updating brings deep optimization, 360 degrees panning control enables gorgeous scenery to be fully realized.
this is a 3-Axis aircraft-mountable motorized gimbal that can allow you to capture smooth, stabilized FPV video and aerial photographs.
compatible with GoPro HERO 4 / 3+ / 3 and other cameras with similar dimension, DJI Phantom series quadcopters andother various drone models.
it has Three Unique Operating Modes, panning mode,panning/tilting Mode, and lock mode.
By connecting the gimbal to an RC receiver you can use a transmitter to switch between additional modes, as well as manually control pan and tilt.
|Model||Feiyu MINI 3D Pro|
|Overload Current Protection||800 mA|
|Pan Angle||0 to 360°|
|Tilt Angle||-90 to +45°|
|Roll Angle||-45 to +45°|
|Panning Following Rate||Minimum: 3֯/second
|Tilt Following Rate||Minimum: 2֯/second
|Static Attitude Tracking Accuracy||Minimum 0.01֯
|Motion Attitude Tracking Accuracy||Minimum 0.1֯
|Interface||8-pin interface (power input, RC receiver connection, and video output)
Analog video output and GoPro camera charging interface (cable included)
Micro-USB (for firmware updates; software only available for Windows)
|Working Voltage||8.4 VDC (7 to 17 VDC)|
|Top Mounting Plate||5 x 7.4cm|
|Weight||167g (without camera)|
You may also be interested in the following product(s).