Cart is empty

Hantek DSO1202B Handheld Oscilloscope/Multimeter 200MHz 1GSa/s

SKU: ZP3020470616038
$ 546.99 $785.99

Availability: In stock

Oscilloscope/Multimeter 200MHz 1GSa/s 1M Memory Depth.
Processing Time 2-3 Days. Shipping Time 3-14 Days
Add to Compare Add to Wishlist
paypal money-back


  • 200MHz Oscilloscope, 1GS/s sample rate, and 6000 Counts DMM with analog bargraph.
  • 1M Memory Depth.
  • High Refresh Rate (2500 frames).
  • Large 5.6 inch TFT Color LCD Display; High Resolution(640*480); Dual-Window Design --More clear, More Detailed
  • One-touch automatic setup optimizes the position, range, timebase, and triggering to assure a stable display of virtually any waveform.
  • Easy-to-use pop-up menu with built-in multi-language help system.
  • 32 Automatic Measurements.
  • Waveform Math: Add, Subtract, Multiply, and Divide.
  • Store and recall over.
  • Automatic cursor tracking measurements.
  • XY Mode.
  • Built-in FFT function converts a time-domain signal into its frequency components to measure harmonic content and distortion in systems.
  • Waveform Recorder to capture/replay input waveforms from CH1 and CH2 with a maximum record length of 1000 frames.
  • Pass/Fail function compares a stored waveform to an unknown input.
  • Average Mode for smoothing waveforms.
  • Square Wave Output (2V, 1kHz) for probe adjustment.
  • USB Host/Device 2.0 full-speed interface; support removeable disk; LAN Option, easy to control by PC or long-distance.
  • Dimensions (mm): 240(L)x165(W)x50(H), be carried easily.


Oscilloscope Mode  
Bandwidth 200MHz
Real-time Sample Rate 1GSa/s
Equivalent Sample Rate 25GSa/s
Record Length(Sample Points) Single-channel: Maximum 1M; Dual-channel:Maximum 512k
SEC/DIV Range 2nS/div-2000S/div (in a 2, 4, 8 sequence)
Delay Time Accuracy 500ps
A/D Converter 8-bit resolution
VOLTS/DIV Range 2mV/div~5V/div at input BNC
Position Range ±50V(5V/div)
Rise Time at BNC ≤1.7ns
DC Gain Accuracy ±4% for Sample or Average acquisition mode, 5mV/div to 2mV/div
±3% for Sample or Average acquisition mode, 5V/div to 10mV/div
Trigger Sensitivity(Edge Trigger Type) DC: CH1/CH2(Typical) 1div from DC to 10MHz;1.5div from 10MHz to Full
AC: Attenuates signals below 10Hz
HF Reject: Attenuates signals above 80kHz
LF Reject: Attenuates signals below 150kHz
Noise Reject: Reduces trigger sensitivity
Trigger Level Range CH1,CH2: ±8 divisions from center of screen
Trigger Level Accuracy, typical (Accuracy is for signals having rise and fall times ≥20ns) CH1,CH2: ±(0.3div×V/div) (within ±4 divisions from center of screen)
Holdoff Range 100ns-10s
Trigger Type  
Edge Trigger on the rising or falling edge
Pulse Width Trigger (when >,
Pulse Width Range 20ns-10s
Video Trigger on an NTSC, PAL, or SECAM standard video signal
Line Range 1-525 (NTSC), 1-625 (PAL/SECAM)
Slope Trigger (when >,
Overtime from the rising or falling edge Set Time: 20-10s
Alternate Internal trigger on edge, pulse width, video or slope
Cursors Manual: The difference between voltage cursors △V; the difference between time cursors △T; 1/△T calculated by Hz.
Tracing: The voltage and time at a waveform point
Automatic Pk-Pk, Max, Min, Mean, Cyc RMS, Frequency, Period, Rise Time, Fall Time, Positive Width, Negative Width
Meter Mode  
Max.Resolution 6,000 Counts
DMM Testing Modes Voltage, Current, Resistance, Capacitance,Diode & Continuity Max. Input Voltage: AC: 600V, DC: 800V
Max. Input Current AC: 10A , DC: 10A
Input Impedance 10 MΩ
Type Right angle 5.6 16-digit color LCD
Resolution 640 x 480 dots
Contrast 16 gears, with the progress bar to show adjustment
Interface USB host and USB slave, Lan Optional
Power Supply  
Voltage DC Input:12--17VDC, 1500mA
Package Size 25 x 17 x 10 cm
Package Weight 1300g

Only registered users can write reviews. Please, log in or register

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

SKU ZP3020470616038
Color No