Cart is empty
0

Hantek DSO5102B Digital Storage Oscilloscope USB 100MHz 1GSa/s 25GSa/s 2 Channel

SKU: ZP3020470616034
$ 368.99 $523.99

Availability: In stock

100MHz 1GSa/s 25GSa/s 2 Channel, Digital Storage Oscilloscope.
Qty:
Processing Time 2-3 Days. Shipping Time 3-14 Days
Add to Compare Add to Wishlist
paypal money-back

Features

  • 100 bandwidths.
  • 1GSa/s Real Time sample rate.
  • Large (7.0-inch) color display,WVGA(800x480).
  • Record length up to 1M.
  • Trigger mode: edge/pulse width/line selectable video/slop/overtime etc.
  • USB host and device connectivity, standard.
  • Multiple automatic measurements.
  • Four math functions, including FFTs standard.
  • Provides software for PC real-time analysis.

Specifications

Model DSO5102B
Real-time Sample Rate 1GSa/s
Equivalent Sample Rate 25GSa/s
Record Length(Sample Points) Single-channel: Maximum 1M; Dual-channel:Maximum 512K (4K,16K,40K optional)
SEC/DIV Range 4nS/div-40S/div (in a 2, 4, 8 sequence)
Delay Time Accuracy 500ps
Vertical  
A/D Converter 8-bit resolution, each channel sampled simultaneously
VOLTS/DIV Range 2mV/div~5V/div at input BNC
Position Range ±50V(5V/div)
40V(2V/div~500mV/div)
2V(200mV/div~50mV/div)&plusmn
400mV(20mV/div~2mV/div)
Bandwidth Limit 20MHz
Rise Time at BNC ≤3.5ns
DC Gain Accuracy ±4% for Sample or Average acquisition mode, 5mV/div to 2mV/div &plusmn
3% for Sample or Average acquisition mode, 5V/div to 10mV/div
Trigger  
Trigger Sensitivity (Edge Trigger Type) DC: CH1/CH2(Typical) 1div from DC to 10MHz;1.5div from 10MHz to Full
EXT(Typical) 200mV from DC to 40MHz
EXT/5(Typical) 1V from DC to 40MHz
AC: Attenuates signals below 10Hz
HF Reject: Attenuates signals above 80kHz
LF Reject: Attenuates signals below 150kHz
Noise Reject Reduces trigger sensitivity
Trigger Level Range CH1,CH2: ±8 divisions from center of screen
EXT: ±1.2V EXT/5: ±6V
Trigger Level Accuracy, typical (Accuracy is for signals having rise and fall times ≥20ns) CH1,CH2: ±(0.3div×V/div) (within ±4 divisions from center of screen)
EXT: ±(6% of setting + 40mV)
EXT/5: ±(6% of setting + 200mV)
Holdoff Range 100ns-10s
Trigger Type  
Edge Trigger on the rising or falling edge
Pulse Width Trigger (when >,
Video Trigger on an NTSC, PAL, or SECAM standard video signal, Line Range: 1-525 (NTSC), 1-625 (PAL/SECAM)
Slope Trigger (when >,
Overtime from the rising or falling edge, Set Time: 20-10s
Alternate Internal trigger on edge, pulse width, video or slope
Measurement  
Cursors Manual: The difference between voltage cursors V; the difference between time cursors T; 1/T calculated by Hz. Tracing: The voltage and time at a waveform point
Automatic Pk-Pk, Max, Min, Mean, Cyc RMS, Frequency, Period, Rise Time, Fall Time, Positive Width, Negative Width
Display  
Type Right angle 7"TFT 16-digit color LCD
Resolution 800 x 480 dots
Contrast 16 gears, with the progress bar to show adjustment
Interface USB host and USB slave
Power Supply  
Voltage 100-120VACRMS(±10%),45Hz to 440Hz,CAT II, 120-240VACRMS(±10%),45Hz to 66Hz,CAT II
Power <30W
Fuse 2A, T rating, 250V
Package Size 32 x 15 x 11 cm
Package Weight 2080g

How do you rate this product?

  1 star 2 stars 3 stars 4 stars 5 stars
Quality
Price
Value

Write your own review

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

SKU ZP3020470616034
Color White