The SKYRC battery charger allows users to set the terminal voltage by themselves and connect it to a PC for PC control and firmware upgrade. If the temperature limit on the charger has been reached, the charging process will be terminated.
SKYRC B6AC V2 is the upgraded version for well-known IMAX B6AC. It can charge and discharge NiMH, NiCd, Pb, LiPo, Li-ion, and LiFe batteries with individual cell balancing for up to 6 lithium cells. Users could also use it as Battery Meter and Battery Resistance Meter. What's more, users can set the terminal voltage and connect it to PC for PC control and firmware upgrade.
Supports AC 100-240V input & DC 11-18V input.
SKYRC B6 AC V2 employs an individual-cell-voltage balancer. It isn't necessary to connect an external balancer for balance charging.
Check voltage readings, such as battery's total voltage, the highest voltage, the lowest voltage and each cell's voltage quickly.
Measure battery's total resistance, the highest resistance, the lowest resistance and each cell's resistance.
The charger allows user to set the charge/ discharge end voltage.
If the temperature limit is reached, the process will be terminated.
Depending on different kinds of batteries, there are different charging modes to meet users' request.
Control your charger and update it with new firmware from "Charge Master".
This charger can be controlled and operated by smart phones via WiFi module (both iOS and Android).
|AC Input Voltage||100-240V|
|DC Input Voltage||11-18V|
|Circuit Power Max Charge||50W|
|Charge Current Range||0.1-6.0A|
|Discharge Current Range||0.1-2.0A|
|Pb(Lead Acid) Battery Voltage||2-20V|
|Product Size (L x W x H)||135 x 144 x 36 mm|
|Package Contents||1 x SKYRC B6AC V2 RC Balancing Battery Charger/Discharger|
You may also be interested in the following product(s).