SKYRC D200 AC/DC Battery Charger with Soldering Iron Dual Output
SKYRC D200 battery charger is a high-performance charge/discharge station with battery management. It is a dual output charger, which supports power distribution with AC source. SKYRC D200 has many functions, like Terminal Voltage Control (TVC), Battery Meter, Battery Internal Resistance Meter etc. What's more, it supports PC control and firmware upgrade.
The dual output function on the SKYRC will allow you to simultaneously charge two different battery packs. In the AC mode the SKYRC will support power distribution such as Channel A-150W and a Channel B-50W, the total power usage would be 200W.
With the battery meter you are able to check a batteries pack total internal resistance and each cell's internal resistance.
Allows you to charge two different battery packs simultaneously.
In AC mode, it supports power distribution, for example, Channel A-150W, then Channel B-50W, the total power is 200W.
Built in Soldering Iron
Can heat up to 450 centigrade with heavy duty 60W.
LIHV Mode Available
The additional LiHV mode is able to charge the new generation of LiPo batteries with an end of charge voltage of 4.35 V.
Lithium Battery Balancer
SKYRC D200 has built in cell voltage balancer.
Current Limit/Capacity Limit/Temperature Threshold/Charging time Limit
Program Data Store/Load
User can store 20 charge/discharge profiles which can be called out without any special program setting.
User can check battery pack's total voltage, and each cell's voltage.
Battery Resistance Meter
User can check battery pack's total internal resistance, and each cell's internal resistance.
User can use 'Charge Master' controlling and viewing real time data with graphs, also can update firmware with it.
Terminal Voltage Control (TVC)
User can modify the end voltage (for expert only).
Charge Master Software
User can monitor pack voltage, cell voltage and other data during the charging, view charge data in real-time graphs, and can also control charging and update firmware from "Charge Master".
|Input Voltage||AC100-240V / DC 11-20V|
|Charge Circuit Power||
DC Input CH A 200W/CH B 100W|
AC Input 200W (Support Power Distribution)
|Discharge Circuit Power||2 x 10W|
|Charger Current Range||CH A 0.1-20A / CH B 0.1-10A|
|Discharge Current Range||0.1-5A|
|Current Drain for Balancing Port||Max 300mA/cell|
|Trickle Charging Current||30mA-300mA & OFF|
|LiPo/LiFe/Lilon/LiHV Battery Cell Count||1-6S|
|NiMH/NiCd Battery Cell Count||1-15S|
|Pb Battery Voltage||2-20V|
|Product Size (L x W x H)||197 x 182 x 71 mm|
|Package Contents||1 x SKYRC D200 Battery Charger Set|