The xDuoo Amp has been created with a built-in overvoltage and overcurrent protection to prevent any potential damage caused to the amplifier if the input voltage or current exceeds the maximum limit. With a aluminium shielded case, this will prevent any external noises interfering with your listening experience.
Arriving with dual 6JI tubes that can be easily rolled, a Japanese ELNA red capacitance for warmer tones and an aluminum case, the xDuoo TA-02 Tube Amp give your the power you need to drive nearly any pair of headphones.
Adopt double 6JI tube for pre-amp, making voice sweet and exquisite.
Adopt transistors for class A buffer, built-in +/-15V for OCL (output capacitor-less) circuit, so it can easily drive any kind of low resistance earphones with strong load capacity.
Make sounds thorough and sweet, soft and warm, high-frequency and magnificent.
Since the TA-02 can handle impedances up to 600 ohm, it's the perfect complement to your high-end, power-hungry headphones.
It uses DC 12V adapter for power supply, through professional boost circuit, making sure the tube is worked at its best condition.
Built-in overvoltage/overcurrent protection, so that it can be prevented damage to the amplifier if the input voltage/current exceeds the limit value.
Built-in mute circuit when turn on amplifier to avoid POP noise and make sure the tube is worked at its best condition.
Use aluminum-shielded case to prevent external interference noise.
Connect to the audio device:
Connect the audio device to the Line-in port of the unit via a audio cable (not included). Playback music on the connected audio device, and then connect the headphones to the unit, enjoying fabulous music.
|Input||RCA (L, R)|
|Output||1/4 inch (6.3mm) headphone jack|
|Power Source||DC12V 2A adapter|
|Output Power||780mW (32 ohm load)|
|Suitable Earphone Impedance||16-600 ohm|
|Product Size||151 x 84 x 70mm|
|Package Contents||1 x xDuoo TA-02 Headphoen Amp, 1 x DC 12V Power Adapter, 1 x Manual|
You may also be interested in the following product(s).